XG105 | Rugged Mobile Computer | Janam
Skip To The Main Content
Products

The Right Features. The Right Price.

XG105

Top Gun.

The XG105 is a rugged mobile computer for customers that need close-range and distance barcode scanning as well as reliable capture of barcodes that are damaged or underneath shrink wrap. With industrial-quality construction and the SE965, Zebra's best-in-class, high performance scan engine, Janam's XG105 delivers unrivaled performance, scanning range and durability.

It is loaded with efficiency-enhancing features such as pre-installed Wavelink® Avalanche and TE, well-spaced keys and mobile DDR memory. The XG Series features Summit WiFi radio, is Aruba and Cisco certified and delivers open air range up to 150' greater than competitive devices. And with the battery in the handle, XG Series products are incomparably light and balanced in hand, making them ideal for scan intensive, extended shift use in demanding environments.

Specifications
TECHNICAL
Operating System Microsoft Windows Mobile 6.1 or Microsoft Windows Embedded Handheld 6.5 
Processor Marvell PXA320 @624MHz
Memory 256MB DDR SDRAM, 256MB NAND Flash ROM
Expansion User accessible microSD card slot
Power Removable, rechargeable 7.4V 2500mAh Li-ion; hot swap and orderly shutdown; 80mAh Ni-MH backup battery
PHYSICAL
Dimensions 7.24" H x 3.51" W x 9.07" L / 18.4 cm H x 8.9 cm W x 23.0 cm L
Weight 24.4oz/692g with battery
Keypad

Backlit 42-key and 52-key; Terminal emulation keypads (5250, 3270, VT)

Display 3.7" Color TFT VGA (480x640); 262K colors
Touch Panel Analog resistance type; stylus input
ENVIRONMENTAL
Operating Temperature 14° to 122° F / -10° to 50° C
Storage Temperature -40° to 158° F / -40° to 70° C
Humidity 5% to 90% RH (no condensation)
Drop Multiple 6ft / 1.8m drops to concrete on all sides across a wide temperature range
Tumble 2,000 tumbles at room temperature (4,000 hits)
Water & Dust IP64 per IEC Sealing Specification
Vibration 0.03 G2/Hz from 20Hz to 2kHz; 1 hour random wave per axis
Electro Static Discharge (ESD) +/- 15kVDC air; +/- 8kVDC contact
INTERFACE FEATURES
Audio Speaker and microphone
Alerts Vibration, LED indicators, full audio
LED Indicators Tri-color indicators at top, rear and bottom
Scan Triggers Pistol-grip trigger (located on handle)
DATA CAPTURE
Scan Engine  Zebra SE965HP
Scan Repetition Rate 104 (±12) scan/sec (bidirectional)
Laser Power (650nm) 1.7mW (nominal peak power), aiming mode 0.67mW
Laser Class CDRH Class II/EC Class 2
DATA COMMUNICATION
WLAN Summit IEEE 802.11b/g; Aruba Networks certified; Cisco certified
WLAN Security WPA-PSK, WPA2-PSK, AES, LEAP, PEAP (MS-CHAPv2), PEAP-TLS, TKIP, EAP-TLS, WEP 40-bit, WEP 128-bit
WPAN Bluetooth v2.0
USB v2.0 client (full speed), v2.0 host
ACCESSORIES
Single-Slot Cradle Kits, Four-Slot Cradle Kits, Battery Charger Kit, Syncing/Charging Cables, DEX Cable, Stylus Tether, Adjustable Handstrap, Stylus 5-pack, Holster
SAFETY/REGULATORY
Safety UL60950-1, EN/IEC 60950-1, EN/IEC60950-1, IEC60825-1
EMI EMI-FCC Part 15 Class B, ICES-003 Class B
RF FCC Part 15.247, ETS 300 328, AS/NZS 4771, IC RSS102, IC RSS210
Specifications Subject to Change.
Accessories

Cradle Kits

  • XG Single-Slot USB/Serial Cradle Kit

    XG Single-Slot USB/Serial Cradle Kit

    (CKT-G1-001U)
    Includes cradle, power supply, line cord and communications cable.

  • XG Single-Slot Ethernet Cradle Kit

    XG Single-Slot Ethernet Cradle Kit

    (CKT-G1-001E)
    Includes cradle, power supply and line cord.

  • XG Four-Slot Cradle Kit

    XG Four-Slot Cradle Kit

    (CKT-G4-001C)
    Includes cradle, power supply and line cord (back of cradle pictured here).

  • XG Four-Slot Ethernet Cradle Kit

    XG Four-Slot Ethernet Cradle Kit

    (CKT-G4-001E)
    Charge and sync four devices (back of cradle pictured here) .

Cables

  • RS232 ActiveSync/Charging Cable

    RS232 ActiveSync/Charging Cable

     (CAB-J-001SP)

    Power supply (PK-G1-001) required to charge a device.

  • DEX Cable.

    DEX Cable.

    (CAB-J-001DX)
    Requires power supply (PK-G1-001).

  • USB Syncing/Charging Cable

    USB Syncing/Charging Cable

    (CAB-J-001UC)
    Requires power supply (PK-G1-001) to charge a device.
  • USB Host Cable

    USB Host Cable

    (CAB-J-001UH)
    Requires power supply (PK-G1-001) to charge a device.

Batteries & Chargers

  • XG Standard Battery

    XG Standard Battery

    (BAT-G1-001)
    2500mAh 7.4V 

  • Four-Slot Battery Charging Base

    Four-Slot Battery Charging Base

    (BK-G4-001)
    Includes charger, power supply and line cord.

Expanded Performance

  • Holster with Shoulder Strap

    Holster with Shoulder Strap

    (HL-G-001)
    Keep the XG100 at the ready while performing other tasks.

Spare & Replacement Items

  • Stylus 5-pack

    Stylus 5-pack

    (ST-XP-5)
  • Power Supply

    Power Supply

    (PK-G1-001)

  • Handstrap with Stylus Sleeve (5-Pack)

    Handstrap with Stylus Sleeve (5-Pack)

    (HS-G5-001)
    Handstrap with integrated stylus holder.
Resources

Product files and documents

 
Quick Start Guide for XG100wm and XG105wm PDF file, 303.46 KB
XG105WM User Guide PDF file, 2.23 MB
XG Series Datasheet PDF file, 284.53 KB
XG105 Specifications PDF file, 109.53 KB

Technology at work

Become a Partner

Get started here: