Wavelink's industry-leading mobile device and wireless infrastructure management solution

» More

XG105

Top Gun

Scan barcodes as far as 17ft (5.2m) away.

The XG105 is a rugged workhorse for customers that need close-range and distance barcode scanning as well as reliable capture of barcodes that are damaged or underneath shrink wrap. With industrial-quality construction and the SE96X, Motorola's best-in-class, high performance scan engine, Janam's XG105 delivers unrivaled performance, scanning range and durability.

It is loaded with efficiency-enhancing features such as pre-installed Wavelink® Avalanche and TE, well-spaced keys and mobile DDR memory. The XG Series features Summit WiFi radio, is Aruba and Cisco certified and delivers open air range up to 150' greater than competitive devices. And with the battery in the handle, XG Series products are incomparably light and balanced in hand, making them ideal for scan intensive, extended shift use in demanding environments.

TECHNICAL
Operating System	Microsoft Windows Mobile 6.1
Processor	Marvell XScale PXA320 @624MHz
Memory	256MB DDR SDRAM, 256MB NAND Flash ROM
Expansion	User accessible microSD card slot
Power	Removable, rechargeable 7.4V 2500mAh Li-ion; hot swap and orderly shutdown; 80mAh Ni-MH backup battery
PHYSICAL
Dimensions	7.24" H x 3.51" W x 9.07" L / 18.4 cm H x 8.9 cm W x 23.0 cm L
Weight	24.4oz/692g with battery
Keypad	Backlit 42-key and 52-key; Terminal emulation keypads (5250, 3270, VT)
Display	3.7" Color TFT VGA (480x640); 262K colors
Touch Panel	Analog resistance type; stylus input
ENVIRONMENTAL
Operating Temperature	14° to 122° F / -10° to 50° C
Storage Temperature	-40° to 158° F / -40° to 70° C
Humidity	5% to 90% RH (no condensation)
Drop	Multiple 6ft / 1.8m drops to concrete on all sides across a wide temperature range
Tumble	2,000 tumbles at room temperature (4,000 hits)
Water & Dust	IP64 per IEC Sealing Specification
Vibration	0.03 G2/Hz from 20Hz to 2kHz; 1 hour random wave per axis
Electro Static Discharge (ESD)	+/- 15kVDC air; +/- 8kVDC contact
INTERFACE FEATURES
Audio	Speaker and microphone
Alerts	Vibration, LED indicators, full audio
LED Indicators	Tri-color indicators at top, rear and bottom
Scan Triggers	Pistol-grip trigger (located on handle)
DATA CAPTURE
Scan Engine	Motorola SE96XHP
Scan Repetition Rate	104 (± 12) scan/sec (bidirectional)
Laser Power (650nm)	1.7mW (nominal peak power), aiming mode 0.67mW
Laser Class	CDRH Class II/EC Class 2
DATA COMMUNICATION
WLAN	Summit IEEE 802.11b/g or 802.11a/b/g; Aruba Networks certified; Cisco certified
WLAN Security	WPA-PSK, WPA2-PSK, AES, LEAP, PEAP (MS-CHAPv2), PEAP-TLS, TKIP, EAP-TLS, WEP 40-bit, WEP 128-bit
WPAN	Bluetooth v2.0
USB	v2.0 client (full speed), v2.0 host
SOFTWARE & DEVELOPMENT
	Janam XG100 SDK, Summit WLAN SDK, Odyssey AppCenter, Wavelink Avalanche (pre-installed), Wavelink Browser (pre-installed), Wavelink TE (pre-installed)
ACCESSORIES
	Single-Slot Cradle Kits, Four-Slot Cradle Kits, Battery Charger Kit, Syncing/Charging Cables, DEX Cable, Stylus Tether, Adjustable Handstrap, Stylus 5-pack, Holster
SAFETY/REGULATORY
Safety	UL60950-1, EN/IEC 60950-1, EN/IEC60950-1, IEC60825-1
EMI	EMI-FCC Part 15 Class B, ICES-003 Class B
RF	FCC Part 15.247, ETS 300 328, AS/NZS 4771, IC RSS102, IC RSS210
Specifications Subject to Change.

Janam offers a full suite of accessories for the XG Series. From charging solutions to cables and cradles for every communication protocol, the XG Series' efficient system of accessories includes everything needed for inside the four walls of the enterprise.

Cradle Kits
	Single-Slot USB/Serial Cradle Kit (CKT-G1-001U) Includes cradle, power supply, line cord and communications cable
	Single-Slot Ethernet Cradle Kit (CKT-G1-001E) Includes cradle, power supply and line cord
	Four-Slot Cradle Kit (CKT-G4-001C) Includes cradle, power supply and line cord (back of cradle pictured here)
	Four-Slot Ethernet Cradle Kit (CKT-G4-001E) Charge and sync four devices (back of cradle pictured here)
Back to Top
Cables
	USB Syncing/Charging Cable (CAB-J-001UC) USB cable to synch your handheld device Requires PK-G1-001 for charging
	RS232 ActiveSync/Charging Cable (CAB-J-001SP) 2500mAh 7.4V
	DEX Cable (CAB-J-001DX) Requires power supply (PK-G1-001)
	Power Supply (PK-G1-001) Use with CAB-J-001UC, CAB-J-001SP and CAB-J-001DX
Back to Top
Batteries/Chargers
	Battery (BAT-G1-001) 2500mAh 7.4V
	Four-Slot Battery Charging Base (BK-G4-001) Includes charger, power supply and line cord
Back to Top
2D Scanning Firmware
	2D Decode Firmware Upgrade (2D-XP-1) Enables 2D barcode decode with any Janam mobile computer More Info
Back to Top
Expanded Performance
	Holster (HL-G-001) Keep the XG100 at the ready while performing other tasks
Back to Top
Spare & Replacement Parts
	Handstrap (HS-P-001) For added user comfort and convenience
	Stylus 5-pack (ST-XP-5)
	Stylus Tether (SS-J5-001) Connecting cord for attaching a stylus to the handheld
Back to Top